Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 368)

clear sntp poll-retry
12-30 Logging and Network Management
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the number of SNTP poll retries to 5:
D2(su)->set sntp poll-retry 5
clear sntp poll-retry
Use this command to clear the number of poll retries to a unicast SNTP server.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the number of SNTP poll retries:
D2(su)->clear sntp poll-retry
set sntp poll-timeout
Use this command to set the poll timeout (in seconds) for a response to a unicast SNTP request.
Syntax
set sntp poll-timeout timeout
Parameters
Defaults
None.
retry Specifies the number of retries. Valid values are 0 to 10.
timeout Specifies the poll timeout in seconds. Valid values are 1 to 30.