Hitachi L2002 - Manual (Page 87)

L200
2
Inverter
Conf
igur
ing
Dr
iv
e P
a
ra
m
e
ters
3–7
Trip Event and History Monitoring
The trip event and history monitoring feature lets you cycle through related information
using the keypad. See
“Monitoring Trip Events, History, & Conditions” on page 6–5 for
more details.
D007 Scaled output frequency
monitor
Displays the output frequency
scaled by the constant in B086.
Decimal point indicates range:
XX.XX 0.00 to 99.99
XXX.X 100.0 to 999.9
XXXX. 1000. to 9999.
XXXX 1000 to 9999 (x10=
10000 to 99999) — Hz times
constant
F-Cnv 00000.00
D013 Output voltage monitor Voltage of output to motor,
range is 0.0 to 600.0V — V
Vout 00000V
D016 Cumulative operation
RUN time monitor
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 /
1000 to 9999 /
Γ100 to Γ999 (10,000 to 99,900)
— hours
RUN 0000000hr
D017 Cumulative power-on
time monitor
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 /
1000 to 9999 /
Γ100 to Γ999 (10,000 to 99,900)
— hours
ON 0000000hr
“D” Function
Run
Mode
Edit
Units
Func.
Code
Name /
SRW Display
Description
“D” Function
Run
Mode
Edit
Units
Func.
Code
Name /
SRW Display
Description
D080 Trip counter Number of trip events,
range is 0. to 9999 — events
ERR CNT 00000
D081 Trip monitor 1 Displays trip event informa-
tion:
• Error code
• Output freq. at trip point
• Motor current at trip point
• DC bus voltage at trip point
• Cumulative inverter opera-
tion time at trip point
• Cumulative power-ON time
at trip point
— —
ERR 1 ########
D082 Trip monitor 2 — —
ERR 2 ########
D083 Trip monitor 3 — —
ERR 3 ########