Teledyne 9110TH - Nitrogen Oxides Analyzer - Manual (Page 103)

Operating Instructions Model 9110TH NOx Analyzer
Teledyne Analytical Instruments 83
Example: If all passwords are enabled, the following menu button sequence would be
required to enter the SETUP menu:
SAMPLE A1:NXCNC1=100PPM NOX=XXX.X
< TST TST > CAL SETUP
SAMPLE ENTER SETUP PASS: 0
0 0 0
ENTR EXIT
prompts for
password
number
Example: this
password enables the
SETUP mode
SAMPLE ENTER SETUP PASS: 0
8 1 8
ENTR EXIT
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
Press individual
buttons to set
numbers
Note that the instrument still prompts for a password when entering the VARS and
DIAG menus, even if passwords are disabled, but it displays the default password (818)
upon entering these menus. The user only has to press ENTR to access the password-
protected menus but does not have to enter the required number code.