Teledyne 9110TH - Nitrogen Oxides Analyzer - Manual (Page 5)

Model 9110TH NOx Analyzer
Teledyne Analytical Instruments v
Valve Options
No Valves
Internal SS Zero/Span Valves
Second Range Span Valve
Internal Zero/Span Valves with Oven (Not available for 9110EH/EM)
Internal Zero/Span Valves with Oven and Permeation Tube (Not available for
9110EH)
The permeation tube option installed depends on the sample gas and the
effusion rate. The specific permeation tube in this instrument is listed below:
Permeation tube Installed:
Alarm Relay Option
This option includes two concentration alarm relays.
Oxygen Sensor
This analyzer is equipped with a paramagnetic oxygen sensor for measuring the oxygen
concentration over the range of 0-25%
Gas Conditioner
A gas conditioner/dryer permeation gas exchange tube is installed for removing H
2
O and
ammonia from the sample stream. This item is required for EN certificatation.
Oxygenator
For applications where background gas less than 2% oxygen and using a Moly converter.
Remote Operation for Purged Enclosure
The operator interface is duplicated with switches mounted on the front door of the enclosure
allowing operation without compromising purge integrity.
Background Gas:
Notes: