Rockwell Automation 1326 Digital AC Multi-Axis Motion Control System User Manual User Manual
Page 113
Advertising
Publication 1394-5.0 — May 2000
Wiring Your 1394 Analog Servo System
5-3
Figure 5.2
Terminal Operating Tool
To use the terminal operating tool with TB1:
1. Put the hook into the hook slot with tab end of the tool to your
left.
2. Gently push the tool to the right to open the wire slot.
3. Insert the wire.
4. Gently release the tool by moving it to the left.
5. Reverse directions for TB2.
Flat tab
Hook
Insert wire
here
Advertising
This manual is related to the following products: