Rockwell Automation 1326 Digital AC Multi-Axis Motion Control System User Manual User Manual
Page 195
Advertising
Publication 1394-5.0 — May 2000
Troubleshooting
9-29
3. Place the axis module on its side so you can locate the fan
housing.
Figure 9.10
Fan Housing on Axis Module
4. Remove the screws that hold the fan housing to the axis module.
Figure 9.11
Fan Housing Screws
5. Gently slide the fan housing out a short distance until you see the
fan plug.
Figure 9.12
Fan Plug
Fan Housing
Screw
Screw
Fan Plug
Advertising
This manual is related to the following products: