Rockwell Automation 1326 Digital AC Multi-Axis Motion Control System User Manual - Manual (Page 286)

Publication 1394-5.0 — May 2000
D-8 Catalog Numbers
1326AS Servo Motors
1326 Shaft Oil Seal Kit for 1326AS Motors
Type
Bulletin
Number
1326
Voltage
Frame
Series Motor
Length
Motor
Winding
Designator Flange
and Shaft
Series
Standard
Options
AS = Rare Earth AC Servomotor
B = 460V AC
3 = 75 mm (Approximate stator size)
4 = 100 mm (Approximate stator size)
6 = 150 mm (Approximate stator size)
8 = 200 mm (Approximate stator size)
Sequentially numbered to indicate the magnet stack length within a given
frame size
Letter designation for rated motor speed
1
21 = IEC metric flange with keyway
K3 = 2.26 N-m (20 lb-in.) Holding brake with 24V DC coil for 1326AS-B3 frame series
K4 = 10.2 N-m (90 lb-in.) Holding brake with 24V DC coil for 1326AS-B4 frame series
K6 = 36.7 N-m (325 lb-in.) Holding brake with 24V DC coil for 1326AS-B6 frame series
K8 = 50.9 N-m (450 lb-in.) Holding brake with 24V DC coil for 1326AS-B8 frame series
xxxxx = Special design options (factory assigned)
1
Refer to the Servo Motor Performance Data section in Appendix A for the rated speeds of the entire 1326AS Series family of motors .
Bulletin
Number
0041
Series
5065 = Nitrile shaft seal for 1326AS-B3 xxxx motors
5066 = Nitrile shaft seal for 1326AS-B4 xxxx motors
5067 = Nitrile shaft seal for 1326AS-B6 xxxx motors
5053-005 = Nitrile shaft seal for 1326AS-B8 xxxx motors