Metrohm viva 1.1 - Manual (Page 174)

3.8 Live display subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
162 ￭￭￭￭￭￭￭￭
viva 1.1
The label of the tab changes to red as soon as a new message has been
entered. The label of the Messages tab changes to black again after you
have viewed the messages and switched to another tab.
3.8.5 Live display - Properties
Dialog window: Workplace ▶ Live display 1 / Live display 2 ▶ Properties Live dis-
play 1 / 2
Command type
Selection of the command type for which the properties in the live display
are to be defined. The curve properties defined for each command type
are saved per live display window and per client.
Selection CVS | CP | CPVS | MEAS T | MEAS Opt | MEAS
TMF
Default value CVS
Measured value display
on | off (Default value: on)
If this check box is activated, then the measured values required are dis-
played in the Live display subwindow.
Measured value 1
Selection of the measured value for measured value display 1. The mea-
sured quantities and the default value depend on the Command type
selected.
CVS
Selection
Current | Potential | Time | Time to finish | Cur-
rent measuring range | off
Default value Potential
CPVS
Selection
Current | Potential | Time | Time to finish | Cur-
rent measuring range | off
Default value Potential
CP
Selection
Current | Potential | Time | Time to finish |
Potential measuring range | off
Default value Potential
MEAS T
Selection
Time | dT/dt | Temperature | off
Default value Temperature