Metrohm viva 1.1 - Manual (Page 773)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1
￭￭￭￭￭￭￭￭ 761
Example: *******1 expects an active input line 0 (1 = set).
NOTE
We recommend masking the irrelevant input lines with an asterisk * so
as not to modify these line statuses.
6.3.3.2 Templates - Output lines
6.3.3.2.1 Managing templates for output lines
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Output lines... ▶ Templates
for output lines
Client-specific bit patterns for setting remote output signals can be
defined in the Templates for output lines dialog window and selected
with the CTRL command and in manual operation. The table with the
defined templates cannot be edited, but it can be sorted according to the
selected column in ascending or descending order by clicking on the col-
umn title.
The [Edit] menu below the list of templates or a right-click on the table
opens a menu with the following menu items:
New... Create a new template (see Chapter 6.3.3.2.2, page 761).
Properties... Edit the selected template (see Chapter 6.3.3.2.2, page 761).
Delete Deletes the selected template.
6.3.3.2.2 Editing templates for output lines
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Output lines... ▶ Templates
for output lines ▶ New... / Properties... ▶ New template / Edit template
Signal name
Name of the template for the output signal.
Entry 25 characters
Output signal
Entry of the bit pattern for the output signal with exactly 14 characters.
It is possible to enter the characters
0 = Line inactive,
1 = Line active,
* = Any line status and
p = Set pulse