Metrohm viva 1.1 - Manual (Page 509)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1
￭￭￭￭￭￭￭￭ 497
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 894 Professional CVS | 846 Dosing Interface |
814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 894 Professional CVS
Remote Box
Selection of a Remote Box connected to the instrument.
846 and 894
Selection
1 | 2 | 3 | 4
Default value 1
814, 815, 858, 919
Selection
1 | 2 | 3
Default value 1
Scan lines
Input signal
Entry of the bit pattern for the expected input signal or selection of a pre-
defined signal pattern.
It is possible to enter a bit pattern of 8 characters. The following charac-
ters can be used:
Selection 0 | 1 | * | Signal pattern
Default value *
0
Line is inactive.
1
Line is active.
*
Any line status.