3 loop, 1 loop - overview, Loop – Metrohm viva 1.1 User Manual
Page 609
■■■■■■■■■■■■■■■■■■■■■■
5 Method
viva 1.1
■■■■■■■■
597
Input range
-1E+99 - 1E+99 (max. 10 places) mL
Default value
'empty' mL
NOTE
Sample data can also be loaded directly from a barcode reader. To
accomplish this, Data import must be enabled in the run window in
which the determination is started (Single determination or Deter-
mination series) and the respective devices must be defined. The
Sample data request dialog window closes automatically after the
data is received from these devices.
5.5.2.10.3
LOOP
5.5.2.10.3.1
LOOP - Overview
Dialog window: Method
▶ LOOP ▶ Properties... ▶ LOOP - 'Command name'
Command for the repeated execution of method parts. The loop can
be ended after the fulfillment of various stop criteria.
Appearance
The command has the following appearance:
A newly inserted loop command has an arrow on the left side that can be
dragged with the mouse to the desired command in the same track in
order to generate a loop. Two different types of loops result, depend-
ing on whether the arrow is dragged upwards or downwards:
Repeat loop
While loop