Metrohm viva 1.1 - Manual (Page 967)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
viva 1.1
￭￭￭￭￭￭￭￭ 955
8 Manual control
8.1 Manual control - General
Program part: Manual control
Definition
The term Manual control is used in viva to refer to the program part in
which the connected devices can be directly controlled, i.e. without a pre-
defined run instruction. The precondition for this is that the devices are
switched on and detected by viva. Manual control is also possible live
during a method run.
Closing
The Manual control dialog window can be closed with [Close] or the
Close Window button.
NOTE
The manual control can only be closed when no manually triggered
actions are running any longer (exception: stirrer on).
8.2 Manual control - User interface
Program part: Manual control
Manual control - Symbol
Clicking on the Manual symbol in the vertical bar on the left opens the
Manual control program part in a separate window; the Manual sym-
bol is displayed in color at the same time.
Elements
The user interface of the Manual control program part comprises the
following elements:
￭ Instrument selection
￭ Functions/parameters
￭ Graphical display