4 curve properties va measuring command - options – Metrohm viva 1.1 User Manual
Page 359
■■■■■■■■■■■■■■■■■■■■■■
4 Database
viva 1.1
■■■■■■■■
347
CVS, CPVS
Selection
orange | 13 colors
Default value
orange
CP
Selection
green | 13 colors
Default value
green
Line thickness
Line thickness of the measurement curve for nondefined solutions.
Input range
1 - 10 pixels
Default value
1 pixels
Base line
on | off (Default value: on)
If this check box is activated, then the baseline and base points are shown
(only for smoothed curves) and the color of the baseline can be selected.
This parameter can be edited only for Quantity = Current [A].
Selection
red | 13 colors
Default value
red
Line thickness
Line thickness of baselines.
Input range
1 - 10 pixels
Default value
1 pixels
4.6.2.2.4
Curve properties VA measuring command - Options
Tab: Workplace / Database
▶ Curves # ▶ Properties Curves # ▶ Options
Options for the graphical display of curves.
Show grid
on | off (Default value: off)
If this check box is activated, then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection
Line types | dotted
Default value
dotted