Metrohm viva 1.1 - Manual (Page 347)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1
￭￭￭￭￭￭￭￭ 335
Var
Variation number.
Rep
Replication number.
Peak potential
Peak potential determined.
Area
Peak area determined (for Evaluation quantity = Area).
Height
Peak height determined (for Evaluation quantity = Height).
Used
on | off (Default value: on)
Shows whether a calibration point is to be used for the calculation of the
calibration curve or not.
Buttons
Selection on
The marking of the calibration points selected in the table is activated.
Selection off
The marking of the calibration points selected in the table is deactivated.
4.6.1.3 Measuring commands curve display
Tabs
In the curve window, a separate tab with the respective command name
(e.g. CVS 1) is displayed for each measuring command. The way the tabs
are arranged depends on how the commands are ordered in the run.
Curve display for measuring commands
The following elements are displayed in the upper part of the curve win-
dow:
￭ Axes with labeling (measured quantity and unit)
￭ Measurement curves
Zoom
Curves can be zoomed within the curve display as often as required by
spanning a square with the left mouse button pressed down. Zooming
can be undone by clicking and holding the mouse button and moving the