Metrohm viva 1.1 - Manual (Page 626)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
614 ￭￭￭￭￭￭￭￭
viva 1.1
Identification Description
SUBST Substance name
POT Peak potential
AREA Peak area
HGT Peak height
START Start base point, where the peak evaluation baseline
begins
END End base point, where the peak evaluation baseline
ends
AREANORM Standardized peak area (AREA/AREA.MNV).
AREA.MNV = VMS.AREA.MNV 1 or ELECTRO-
LYTE.AREA.MNV 2 (only one of these two variables
may be present in a determination)
HGTNORM Standardized peak height (HGT/HGT.MNV).
HGT.MNV = VMS.HGT.MNV 1 or ELECTRO-
LYTE.HGT.MNV 2 (only one of these two variables
may be present in a determination)
1 for calibration method DT
2 for calibration method RC
Result variables per substance and variation
Designation 'RS.'Command name'.'Substance name'.VAR{x}.Varia-
ble identification'
Identification Description
AREA.MNV Mean value of the peak areas of all replications
AREA.ASD Absolute standard deviation of the peak areas of all
replications
AREA.RSD Relative standard deviation of the peak areas of all
replications
AREA.MNVD
ELTA Difference between the mean value of the peak
areas of all replications for measurement {x} and the
mean value of the peak areas of all replications for
measurement {x-1}
HGT.MNV Mean value of the peak heights of all replications
HGT.ASD Absolute standard deviation of the peak heights of
all replications