Metrohm viva 1.1 - Manual (Page 328)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
316 ￭￭￭￭￭￭￭￭
viva 1.1
MEAS T
Selection
13 colors | magenta
Default value magenta
Curve properties measuring commands - Options
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ Options
Options for the graphical display of curves.
Show grid
on | off (Default value: off)
If this check box is activated, then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection Line types | dotted
Default value dotted
Grid color
Selection of the color for the grid lines.
Selection 13 colors | gray
Default value gray
Background
Background color
Selection of the color for the curve background.
Selection 13 colors | white
Default value white
Show end points
on | off (Default value: off)
If this check box is activated, then the endpoints found will be shown on
the curve with the ♦ symbol and labeled with BP# (break point), FP#
(fixed point), MI (minimum value) or MA (maximum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection 13 colors | black
Default value black