Metrohm viva 1.1 - Manual (Page 310)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
298 ￭￭￭￭￭￭￭￭
viva 1.1
4.5.2.5.5.2.2 Measuring commands curve display
Tabs
In the curve window a tab with the corresponding command name and
the run index (e.g. Chloride.1) is provided for each run of a measuring
command; their sequence is determined by the method.
Curve display for measuring commands
The following elements are displayed in the upper part of the curve win-
dow:
￭ Axes with labeling (measured quantity and unit)
￭ Measurement curves
Zoom
Curves can be zoomed within the curve display as often as required by
spanning a square with the left mouse button pressed down. Zooming
can be undone by double-clicking or using the context-sensitive Show all
menu command.
NOTE
When a new determination is selected the complete curve is always
shown, i.e., the zoom range is not retained when the determination is
changed.
Context-sensitive menu items
Show all Resets the zoom and shows curves completely.
Measuring point
list... Opens the Measuring point list - 'Command name.#' dialog window (see
Chapter 4.5.2.5.5.2.3, page 298).
Properties Curves
#… Opens the Properties - Reprocess curves dialog window to define the prop-
erties of the curve display (see Chapter 3.9.2.3, page 185).
Copy graphics Copies curves to the clipboard.
4.5.2.5.5.2.3 Curves - Measuring point list
Subwindow: Database ▶ Curves #
The context-sensitive Measuring point list... menu item in the curve
window opens the Measuring point list - 'Command name.#' dialog
window for displaying the measuring point list of the selected curve.
The display of the measuring points in the table can be defined per win-
dow and per command type (see Chapter 3.9.2.3.5, page 192).