Metrohm viva 1.1 - Manual (Page 736)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
724 ￭￭￭￭￭￭￭￭
viva 1.1
The following condition applies for the evaluation ratio for the DT calibra-
tion method:
Calibration factor
Suppressor concentration in the sample solution without dilution:
Suppressor concentration in the sample solution with dilution:
Variable Description
Concentration of the suppressor standard solution for
creating the calibration curve.
Effective addition volume of the suppressor standard
solution on the evaluation criterion.
Total volume (calibration) in the measuring vessel at the
moment of the measurement of the VMS by calling the
measuring command via the command CALL VMS at
the moment of calibration.
Suppressor concentration in the sample solution.