Metrohm viva 1.1 - Manual (Page 199)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1
￭￭￭￭￭￭￭￭ 187
MEAS T
Selection
Time | dT/dt | Temperature
Default value Temperature
For CAL Spec
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels
Default value Intensity [Counts]
For MEAS TMF
Selection
Time [s] | Measured value [mAU] | Transmis-
sion [%] | Temperature [°C] | dε/dt [mAU/min]
Default value Measured value [mAU]
Label
Freely definable axis label for the y1 axis. If auto is selected, then the des-
ignation from the Quantity field will be used.
Selection 50 characters | auto
Default value auto
Manual scaling
Start value
Initial value for scaling the y1 axis.
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value -1.00E+12
End value
End value for scaling the y1 axis.
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value +1.00E+12
Curve
Curve color
Selection of the color for the line of the curve.
Selection 13 colors | light blue
Default value light blue