Metrohm viva 1.1 - Manual (Page 450)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
438 ￭￭￭￭￭￭￭￭
viva 1.1
Pump(s)
Selection of the pumps that are to be actuated. These can be installed or
connected externally. The two pumps of the selected tower are actuated
simultaneously with 1+2.
Selection 1 | 2 | 1+2 | Peristaltic
Default value 1
1
Pump 1 is actuated.
2
Pump 2 is actuated.
1+2
The two pumps of the selected tower are actuated simultaneously.
Peristaltic
The peristaltic pump installed on the tower is actuated.
Rate
Speed at which the peristaltic pump is to be operated. This parameter is
visible only when Pump(s) = Peristaltic.
Input range -15 - 15
Default value 10
Actions
Selection Switch on | Switch off | Duration
Default value Duration
Switch on
Activation of the pump(s).
Switch off
Deactivation of the pump(s).
Duration
Activation of the pumps during a defined period.
Pump(s) = 1, 2, 1+2
Input range
0 - 9,999.9
Default value 8.0
Pump(s) = Peristaltic
Input range
0 - 9,999.9
Default value 300.0
Selection s | min
Default value s