Metrohm viva 1.1 - Manual (Page 453)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1
￭￭￭￭￭￭￭￭ 441
814, 815, 858, 919
Selection
1 | 2 | 3
Default value 1
089
Selection
1 | off
Default value 1
Stirrer type
Shows the stirrer type. unknown is displayed on instruments to which no
stirrer is connected or at which the stirrer type cannot be read out.
Stirring rate
Setting the stirring rate or rotational speed. The algebraic sign of the stir-
ring rate changes the direction in which the stirring is done. The standard
setting 8 corresponds to a rotational speed of 1,000 rpm.
846, 815, 858, 919
Input range
-15 - 15
Default value 8
089
Input range
0 - 15
Default value 8
894
Input range
0 - 3,000 min ⁻¹
Default value 2,500 min ⁻¹
Action
846, 815, 858, 919, 089
Selection
Switch on | Switch off | Duration
Default value Duration
Switch on
Switch on the stirrer. The stirrer remains activated, even after the end
of the command.
Switch off
Switch off the stirrer.
Duration
The stirrer can remain switched on for a specific time.
Input range 0.0 - 9,999.9 min
Default value 10.0 min