Metrohm viva 1.1 - Manual (Page 440)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
428 ￭￭￭￭￭￭￭￭
viva 1.1
Target
Tower
Selection of the tower on the sample changer for moving to the required
position.
Selection 1 | 2
Default value 1
Move
Selecting the target position on the rack:
Selection Sample position | Rack position | Special
beaker | Relative angle
Default value Sample position
Sample position
Position that is defined for the current determination in the Run sub-
window of the Workplace program part as Sample position para-
meter.
Rack position
Absolute position on the rack.
Special beaker
Special position on the rack that is defined in the rack properties in the
Configuration program part.
Relative angle
The sample rack can be rotated by a certain angle independent of the
rack positions. This function can be used, for example, to remove vial
caps automatically.
Number
Specification of the number of the rack position. This parameter is visible
only when Move = Rack position or Special beaker. The position can,
however, also be entered as a formula. The formula editor is opened with
a right click on the input field.
Move = Rack position
Input range
1 - 999
Default value 1
Move = Special beaker
Input range
1 - 16
Default value 1