Metrohm viva 1.1 - Manual (Page 607)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1
￭￭￭￭￭￭￭￭ 595
Dilution volume
on | off (Default value: off)
If this check box is activated, then the Dilution volume will be requested
(see Glossary, page 1051).
Message
on | off (Default value: off)
If this check box is activated, then the message defined here appears in
the Sample data request dialog window, in which the sample data is
requested at the moment of the method run (see Chapter 5.5.2.10.2.3,
page 595). The text editor for entering or changing the message is
opened with or by double-clicking on the text field (see Chapter
2.4.2, page 78).
Entry Text (unlimited)
5.5.2.10.2.3 REQUEST - Sample data request
Dialog window: Workplace ▶ [START] ▶ Sample data request
Entry of sample data for the sample data variables defined in the
REQUEST command. The data in this window can be entered manually.
By pressing [Enter], you can complete the data input for one field and
jump to the next one.
If fixed values are defined for sample data variables in the START com-
mand, then these will be entered in the respective parameter fields. The
fixed values displayed in italics cannot be edited.
Message
Shows the message defined in the REQUEST command.
ID1 - ID16
Sample identifications.
Type = Number
Input range
-1.0E-99 - 1.0E+99
Type = Text
Entry
max. 100 characters
Type = Date/Time
Selection
'YYYY-MM-DD' or 'YYYY-MM-DD hh:mm:ss'