Metrohm viva 1.1 - Manual (Page 844)

6.12 Rack data subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
832 ￭￭￭￭￭￭￭￭
viva 1.1
Beaker sensor
Defines the beaker sensors for the rack.
Device
Shows the devices to which the rack is attached.
Table view
The rack table cannot be edited directly. Click on the column title to sort
the table according to the selected column in either ascending or
descending order. The table view can be adapted with the left mouse but-
ton as follows:
￭ Dragging the margin between column titles:
Sets the column width
￭ Double-clicking on the margin between column titles:
Sets the optimal column width
￭ Dragging the column title:
Moves the column to the required location
If the content of a field is larger than the column width, then the entire
content will be shown as a tooltip if the mouse cursor hovers over the
field.
For sample racks that are placed on a Sample Processor and that are auto-
matically recognized, the corresponding device name will be displayed in
the Device column. In addition the line number will be shown with a
green background.
If a rack is reserved for an ongoing determination or for manual control,
then the line will be shown in gray and the rack cannot be edited until the
determination has been finished.
Functions
The [Edit] menu beneath the rack table contains the following menu
items:
New... Add manually a new rack (see Chapter 6.12.2.2, page 833).
Delete Deletes the selected rack (see Chapter 6.12.2.3, page 833).
Properties... Edit the selected rack (see Chapter 6.12.3.1, page 834).
Print (PDF)... Output of the rack table as a PDF file .(see Chapter 6.12.2.4, page 833)