Metrohm viva 1.1 - Manual (Page 808)

6.7 Sensors/electrodes subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
796 ￭￭￭￭￭￭￭￭
viva 1.1
NOTE
The name of the four nondeletable standard sensors Auxiliary elec-
trode, RDE, Reference electrode and Temperature sensor cannot
be changed.
Sensor type
Display of the type of sensor.
Order number
Order number of the sensor.
Entry 24 characters
Default value 'empty'
Sensor serial number
Serial number of the sensor.
Entry 10 characters
Default value 'empty'
Device name
Selection of the device to which the sensor is connected. All devices in the
device table to which sensors can be connected are shown in the selec-
tion list. The connection of a sensor to a particular device is not checked
during the run.
Selection Device selection | 'empty'
Default value 'empty'
Comment
Possibility of entering remarks about the sensor.
Entry 24 characters
Default value 'empty'
Set to work
The current date is automatically entered here for a newly added sensor.
When an existing sensor is edited, the date can be selected after clicking
on in the Select date dialog window (see Chapter 2.4.1, page 77).