Metrohm viva 1.1 - Manual (Page 948)

7.10 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
936 ￭￭￭￭￭￭￭￭
viva 1.1
Selection 'Port designation' | calculated value
'Port designation'
All analog input ports can be selected.
0% Mapping
Measured value to be used when the Low level (0 %) is applied as input
value.
Only editable for Control variable = calculated value, otherwise
grayed out and not available for editing.
Input range -214,783,647.000 - 214,783,647.000
Default value 0 or controlled variable setting, respectively
100% Mapping
Measured value to be used when the High level (100 %) is applied as
input value.
Only editable for Control variable = calculated value, otherwise
grayed out and not available for editing.
Input range -214,783,647.000 - 214,783,647.000
Default value 100 or controlled variable setting, respec-
tively
Unit
Unit of the measured value to be used.
Only editable for Control variable = calculated value, otherwise
grayed out and not available for editing.
Entry 50 characters
Default value % or controlled variable unit, respectively
Default value
Selection or input of the standard value which is to be used for the input if
the result is invalid.
Input range 0% mapping of the input - 100% mapping of
the input
Selection last value | Setpoint value
Default value last value
Setpoint value
Setpoint value to which the control is to be set.