Metrohm viva 1.1 - Manual (Page 604)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
592 ￭￭￭￭￭￭￭￭
viva 1.1
Parameters
The END command has no parameters. It is generated automatically at
the end of the track when a track is inserted.
Command variables
No command variables are generated in the method run by the END
command.
5.5.2.10 Various commands
5.5.2.10.1 Various commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Miscellaneous
Various commands that can be used independently of the connected
instruments.
The following commands can be selected:
￭ REQUEST
Scans sample data.
￭ LOOP
Multiple execution of method parts.
￭ WAIT
Stops the method run.
￭ SEQUENCE
Combines several commands to one command.
5.5.2.10.2 REQUEST
5.5.2.10.2.1 REQUEST - Overview
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - 'Command
name'
Command for a sample data query in the method run. The data can
either be entered manually or adopted from an input device (barcode
reader).
Appearance
The command has the following appearance:
Parameters
The parameters for the command REQUEST are set in the following dia-
log window:
￭ REQUEST