Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 180)

Bio-Plex Manager Software 6.1 User Guide | Analyzing the Results
168
Standard Curve
The Standard Curve window displays the standard curve for each standard
analyte in the Results file, and allows you to change the regression model as
well as various curve display controls for each analyte. (Curve settings are
initially selected in the Enter Standards Info window in a Protocol; see
page 78.)
Click the Standard Curve button to open the Standard Curve window.
Figure 153. Standard Curve
In the graph, standards defined on the current plate are displayed as blue
squares, while external standards are displayed as red circles. If both
standard curves are displayed on the graph. Outliers and partial outliers will
be displayed on the curve as indicated in the legend below the curve.
The equation for the selected regression method as well as some curve fit
statistics (fit probability, residual variance) will be displayed below the
standard curve. Equations for standards defined on the current plate are
shown in blue, while equations for external standards are displayed in dark
red. Any curve-fitting errors will also be displayed below the curve in red.
Use the Analyte pulldown list to display the curve for a selected analyte.
Above the curve, use the Labels pulldown list to select from a variety of
different labels for the points in the curve. If both external and current
standards are displayed in the graph, labels will only be displayed for the
external standards.
BioPlex_6.book Page 168 Friday, September 23, 2011 11:55 AM