Setting up a validation run, Control number selection – Bio-Rad Bio-Plex Software® Upgrades and Conversions User Manual
Page 54
Bio-Plex Manager Software 6.1 User Guide | Controlling the System
42
Setting Up a Validation Run
To set up a validation reading, click the Validation button
on the main
toolbar or select the command from the Instrument menu. The Validation
dialog box opens.
Figure 25. Validation dialog
Enter your user name in the top field. If you are using the Security Edition of
the software in Secure Mode, your user name is listed and grayed out.
Control Number Selection
In the Validation dialog box, select the Control Number for your specific Bio-
Plex Validation Kit from the Control Number pulldown list. The expiration date
for the control number is listed below the field.
If the control number is not available in the list, or the list is too long and you
want to limit it to the control numbers you are using, click the Add/Remove
button.
Figure 26. Add/Remove Control Numbers dialog
BioPlex_6.book Page 42 Friday, September 23, 2011 11:55 AM