Bio-Rad Bio-Plex Software® Upgrades and Conversions User Manual
Page 95
Advertising
Protocol Window
83
2. Once each analyte’s starting concentration is entered, apply the dilution
factor which is appropriate for your experiment.
Figure 74. Applying the Dilution Factor
3. The software will calculate all the concentrations for each analyte at
each dilution, as seen below.
Figure 75. Bio-Plex Manager calculates concentrations
BioPlex_6.book Page 83 Friday, September 23, 2011 11:55 AM
Advertising
This manual is related to the following products: