Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 186)

Bio-Plex Manager Software 6.1 User Guide | Analyzing the Results
174
You can also copy the regression method equation from below the standard
curve by dragging your cursor over the equation to highlight it, and then
selecting Copy from the Edit menu or right-click Context menu.
Figure 157. Copying regression method equation
Printing the Standard Curve
You can print the standard curve for the selected analyte using the Print
command on the main toolbar or File menu. You can print the curves for
all analytes using the Print All Analytes command on the main toolbar or
File menu.
When you select a print command, a dialog box will open, allowing you to
specify the page layout of the printed curve. The layout diagrams show the
number of curves that can be printed on a page. If you are printing the curve
for a single analyte, that curve will be sized based on the layout you select (for
example, the layout will size the curve at one-quarter the full size of the
page). The regression type will be printed below each curve.
Figure 158. Print Standard Curve dialog.
Select a layout and click OK to display the standard Windows Print dialog.
BioPlex_6.book Page 174 Friday, September 23, 2011 11:55 AM