Quick guide – Bio-Rad Bio-Plex Software® Upgrades and Conversions User Manual
Page 32
Bio-Plex Manager Software 6.1 User Guide | Quick Guide
20
The Bio-Plex Manager software status bar is below the instrument status bar,
and provides information about the command under the cursor. This
information is continuously updated as you move your cursor over the
software window.
The software status bar also shows the current user and, if you are using the
Security Edition of the software, whether you are in Secure Mode (shown as a
"locked" symbol
) or Standard Mode (shown as "unlocked"
). See
page 5 of this manual, and the Bio-Plex Manager 6.1 Software Upgrade and
Configuration Guide for more information about the Security Edition.
The software status bar also shows the Caps Lock, Scroll Lock, and Num
Lock keyboard status.
Quick Guide
When Bio-Plex Manager first opens, a Quick Guide toolbar appears in the
upper right corner of the screen. You can use the Quick Guide to guide you
through the typical workflow, from start up and calibration through shut down.
Figure 9. Bio-Plex Quick Guide
By default, the Quick Guide opens automatically when you start Bio-Plex
Manager. To disable, deselect the Show at startup checkbox at the bottom of
the guide.
To open the Quick Guide after closing, select Quick Guide from the View
menu.
BioPlex_6.book Page 20 Friday, September 23, 2011 11:55 AM