Bio-Rad Bio-Plex Software® Upgrades and Conversions User Manual
Page 94
Bio-Plex Manager Software 6.1 User Guide | Preparing Protocols
82
E
NTERING
S
TANDARD
L
OTS
M
ANUALLY
If your lot is not preloaded in the software or you cannot find it on the Bio-Rad
web site, you can enter the information manually from the product insert. You
can save any manually entered standard information as a new standard lot, as
described above.
Kits fall into two categories; those which have various starting concentrations
and those which have the same starting concentration for each analyte.
When starting concentrations vary across all analytes—
There are a
number of ways to edit values and apply dilutions. The following outlines the
most efficient approach.
1. Enter the starting concentration of each analyte directly in the
spreadsheet within the interface. Enter each analyte before proceeding
to the next step. Make sure the “Apply same concentration to all
analytes” box is unchecked (default)
BioPlex_6.book Page 82 Friday, September 23, 2011 11:55 AM