Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 63)

Shut Down
51
Cancel Operation
The Cancel button, located in the status bar at the bottom of the Bio-Plex
Manager window, can be used to cancel many of the instrument functions,
including calibration, validation, or any of the fluidics functions. Click the
Cancel button to cancel the current operation. An alert box prompts you to
confirm the cancellation.
Figure 35. Cancel button in the status bar
Shut Down
The shutdown procedure consists of a series of functions designed to clean
the fluidics lines and prevent a buildup of debris within the system.
To initiate this process, select Shut Down from the main toolbar or
Instrument menu, and follow the instructions in the dialog box.
Figure 36. Shut Down dialog
Instrument Operations Log
Each instrument operation you perform with Bio-Plex Manager is recorded in
the Instrument Operations Log. This log is stored in a secure database file
called bioplexdata.mdb. By default, this log is saved in the main Bio-Plex
Manager application folder on your computer.
BioPlex_6.book Page 51 Friday, September 23, 2011 11:55 AM