Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 64)

Bio-Plex Manager Software 6.1 User Guide | Controlling the System
52
NOTES: If you install Bio-Plex Manager 4.0 or later, the data from your
existing database (bioplex.mdb) copies into the new database
(bioplexdata.mdb). A copy of your old database will remain in the application
folder.
This Instrument Operations Log did not exist in Bio-Plex Manager versions
before 4.0, so if you are installing Bio-Plex Manager 6.1 over versions earlier
than 4.0, no Instrument Operations data will be copied.
To view this log, go to the View menu and select Instrument Operations Log.
The log viewer opens.
Figure 37. Instrument Operations Log Viewer
Each instrument operation is listed by date and time. If you are using Bio-Plex
Manager Security Edition in Secure Mode, the User and Access Level
columns list information about the user who was logged into the application
when each operation was performed.
To print the log, click the Print button .
To copy the information in the log to the Windows clipboard and paste it into
another document, drag your cursor over the rows and columns in the table to
select them, and use the Ctrl + C key command to copy the data.
BioPlex_6.book Page 52 Friday, September 23, 2011 11:55 AM