HP R4.2 - Manual (Page 118)

3
Voice System Administration Message Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 79
5 Complete the Saving Changes and Exiting Message Administration on
page 83 procedure.
The system installs the changes on the voice system.
Modifying Message Priorities
This procedure allows you to modify message priority. When the system is
installed, each message is assigned a particular priority. In most cases,
these priorities are appropriate and do not need to be modified. Depending
on the type of application, however, you may want to modify a message
priority.
Events are messages of priority none (denoted by “–” in the System Message
Administration window). Alarms are messages of priority minor, major, and
critical (denoted by “*”, “**”, and *C, respectively) in the System Message
Administration window.
Note: If you modify the message priority of some system messages, it
can have an impact on other processes within the system. For
example, if you change the message priority of HDWR001 to
critical (*C), the alarm on the TAM is also changed to critical. See
"HDWR Alarms and Log Messages" in Chapter 4, "Alarms and
Log Messages," in UCS 1000 R4.2 System Reference, 585-313-
210, for more information on the HDWR alarms and the TAM.