HP R4.2 - Manual (Page 453)

A
Summary of Commands defService
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 414
defService
The defService command defines an IRAPI service.
Synopsis
defService [-h] [-n] [-s <servicename>] [-p <process>] [-t P | T] [-a 0 |1 |2
|3 |4] [<application>]
Description
The defService command is for use by IRAPI application developers. It
creates the registration file for an IRAPI service that is necessary for
assigning or deleting service to or from a channel or DNIS and/or ANI. For
TSM scripts, the output of the tas command serves as the registration file for
the script.
If the defService command is entered with no options, defService prompts
you for all of the necessary information. You will need to respond to fewer
prompts if you enter the majority of the information from the command line.
The -h option allows you to print the usage statement and then exit.
The -n option uses the default values for all options not specified on the
command line. However, no defaults exist for the <process> and
<application> parameters.