Displaying digital r2 mfc - mexico parameters – HP R4.2 User Manual
Page 209
Advertising
4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 170
Displaying Digital R2 MFC - Mexico Parameters
The E1 circuit card must first be assigned to the Digital R2 MFC - Mexico
protocol to use this procedure. See
Assigning the Digital R2 MFC - Mexico
Protocol to E1 Circuit Cards on page 164
for more information about making
the initial assignment.
To display the Digital R2 MFC - Mexico parameters of an E1 circuit card:
1
Start at the Digital R2 MFC Protocol - Mexico menu (
Figure 93 on page
164
) and select:
The system displays the Display Parameters: Digital R2 MFC Protocol -
Mexico window (
Figure 96 on page 171
).
> Display Parameters
Advertising