HP R4.2 - Manual (Page 650)

A
Summary of Commands trarpt
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 611
The parameters for the trarpt command are:
• <hours> — Specifies the hours in which the traffic data was collected.
The valid options can be a range between 0 to 23 (with 0 representing
midnight and 23 representing 11 p.m.) or “all.”
• <summarize> — Indicates a traffic report or a traffic summary report to
be generated. If the option is “n”, the report provides information on the
total traffic volume for each channel in one-hour increments. If the option
is “y,” the report is a summary report that provides information on the total
traffic volume for each channel for the whole period specified in the
<hours> parameter.
• <date> — Specifies the date the data was collected in the system. This
parameter can be in the mm/dd/yy or mm/dd/yyyy format.
If a 2-digit year argument is used, the following rules apply:
~ If the year argument is 70 and above, the 20th century is assumed. For
example, 5/27/96 is interpreted as May 27, 1996.
~ If the year argument is between 00 and 69, the 21st century is
assumed. For example, 5/27/06 is interpreted as May 27, 2006.
Example
The following two examples generate a traffic summary report for data
collected on date August 24, 1993 between 8 a.m. and 5 p.m. on multiple
entries per channel, and are equivalent command statements.