HP R4.2 - Manual (Page 398)

7
Common Administration Reports Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 359
The data in the Signal Processing Activity report is collected by the spadc
command. The spar command then summarizes and displays the data in an
ASCII file.
Data Collection for
the Signal
Processing Activity
Report The spadc command collects data for the day of the week on which the
command is executed, and outputs the data to an ASCII file named mm-dd-
yyyy (for example, 09-12-2000).
The mm-dd-yyyy file contains one line of data for each 5-minute period
during which the voice system is running. Each line consists of 10 fields:
• Field 1 — Date and time using the mm/dd/yyyy:HH:MM format.
• Field 2 — Feature licensing usage information. This field contains 10
entries representing average and peak values for the Text-to-Speech,
Dial Pulse Recognition, and WholeWord Speech Recognition feature
package use of the signal processing resources.
• Fields 3–8 — One field for each of the speech and signal processing
circuit cards in the system. Each field contains entries representing
average and peak values for circuit card occupancy, followed by average
and peak values for use by each of the following processes/features:
~ WholeWord Speech Recognition
~ FlexWord Speech Recognition
~ Echo cancellation
~ Call Classification Analysis