HP R4.2 User Manual
Page 154
3
Voice System Administration
Voice Equipment
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 115
!
CAUTION:
Be careful when making assignments and reassignments. Assignments
made in the Assign LSPS Functions window overwrite any other assignments
that are currently in effect on the specified circuit cards.
2
Enter a single number or press
F 2
(Choices) to select from a menu in the
Card Number:
field. After entering the card number, the current settings
are displayed.
3
In the remaining fields, enable the function with Yes or disable with No.
Several of these functions can be used in combination with one another,
depending on the type of circuit card and the software installed.
on page 116
describes the valid functionality combinations.
!
CAUTION:
You
CANNOT
assign the same function to both an LSPS and an SSP card.
Note:
If you move a speech function (such as play, code, echo
cancellation, WholeWord, FlexWord, or Text-to-Speech) from an
SSP card to an LSPS II card, or vice versa, you must stop and
start the voice system for the change to take effect. If you do not,
the voice system will continue to use the former assignment.