HP R4.2 - Manual (Page 140)

3
Voice System Administration Voice Equipment
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 101
6 (Optional) In the State: field, enter a maintenance state, or press F 2
(Choices) to select from a menu. This field limits the voice equipment
display to circuit cards or channels in a particular state. If you leave this
field blank, all maintenance states are displayed. See
Equipment State on
page 103 for a list and description of each maintenance state.
7 (Optional) In the Service: field, enter a service name, or press F 2
(Choices) to select from a menu. This field is used to limit the voice
equipment display to channels that are associated with a particular
service or function. This field is valid only if the
Equipment: field is
channel. If you leave this field blank, the system does not restrict the
display to any one service.
A special service name of “*DNIS_SVC” is available. If you enter
*DNIS_SVC, the voice equipment display shows the number service
based on the calling party’s number.
8 Press F 3 (Save).
The system saves the display settings to a file and returns to the Display
Voice Equipment window with the modified parameters.
Equipment Options
The equipment options indicate to the voice system the functionality of the
digital circuit cards (also known as
voice circuit cards ).