HP R4.2 - Manual (Page 622)

A
Summary of Commands spStatus
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 583
The spsav command invokes an interactive program asking you to insert
and remove cartridge tapes periodically. If the -v option is used, the
system displays information about each step of the back up.
Example
The following example saves listfile “list.cabnt” from cartridge tape:
spsav -O /dev/rmt/c0s0 -v -t listfile list.cabnt
spStatus
The spStatus command displays information about the pack file running on
an SP card.
Synopsis
spStatus [-b SP-index] [-i interval] [-c count] [-r] [-B]
Description
A substantial amount of information about the state of an SP Executive pack
(PRI and CCA pack files) is available from shared memory and the program
spStatus, which displays the information. The information is defined in
include/spStatus.h
.
The following are the options that can be used with the spStatus command: