Remote terminal administration – HP R4.2 User Manual
Page 331
6
Peripheral Administration
Remote Terminal Administration
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 292
8
Do one of the following:
~
If you want a banner page to print, skip the following steps a through c
and continue with step 9.
~
If you do not want a banner page to print, complete the following steps
a through c.
a
Enter /usr/lib/lp/model
b
Enter cp standard LANHP
c
Edit the LANHP file and change
nobanner=”no”
to
nobanner=”yes”
.
9
Enter lpstat -t
The output should indicate the lpstat spooler is running and the printer
you added should be displayed.
10
To make this printer the default, enter lpadmin -dhp4si
Remote Terminal Administration
This section describes the procedures to configure and administer a remote
terminal for use with the voice system.