HP R4.2 - Manual (Page 460)

A
Summary of Commands delete service/startup
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 421
• <chan number | phone number> — Contains a list of one or more
channels or telephone numbers separated by blanks. The word “any” or
“all” shows that service is removed from all calls regardless of what
number was dialed.
The chan_list variable indicates channel numbers or channel number ranges
in the form chan1-chan2. Use a comma or space to separate the list of
channel numbers or ranges.
The phone_list variable indicates telephone numbers or telephone number
ranges in the form phone1:phone2. Use a comma or space to separate the
list of telephone numbers or ranges.
Note: Only telephone numbers that were assigned using the assign
service/startup command can be deleted.
Examples
The following example deletes startup service stdout from channels 4 through
7.
delete startup stdout from chan 4-7
The following example deletes the service stdout and startup service stdin
from channels 4 through 7.
delete startup stdin service stdout from chan 4-7