HP R4.2 - Manual (Page 202)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 163
3 Press F 3 (Save).
The system removes the T1 A/B Robbed-bit E&M assignment from the
selected circuit card.
4 Press F 6 (Cancel) repeatedly to return to the Digital Interfaces menu.
E1 CAS Protocols
The UCS 1000 R4.2 supports the E1 Channel Associated Signaling (CAS)
protocol Mexico for use with the DEFINITY switch.
The following CAS protocol is supported with the installation of the
corresponding switch integration packages:
• Digital R2 MFC - Mexico
Digital R2 MRC -
Mexico Protocol Accessing Digital R2 MFC - Mexico Menu
To access the E1 CAS for Mexico protocol menu:
1 Start at the Digital Interfaces menu ( Figure 86 on page 145 ) and select
> Digital R2 MFC - Mexico