HP R4.2 - Manual (Page 469)

A
Summary of Commands diagnose card
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 430
diagnostic routine. If, while running diagnose, you want to stop the command,
a message similar to the following may appear:
Aborting request. Further administrative action may be
needed to reach desired state.
The diagnostics command for board board number has been
stopped.
The card will be marked as BROKEN.
Or, the system may display:
Could not stop diagnostics for board board number .
The diagnostics may continue to run in the background. Use the display
command to check the state of the card.
Examples
The following example runs diagnostics on card number 3.
diagnose card 3
The following example runs diagnostics on cards 4 through 7.
diagnose card 4-7
The following example runs diagnostics on cards 4 through 7 immediately,
dropping all calls currently in progress.
diagnose card 4-7 immed