HP R4.2 - Manual (Page 223)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 184
2 Enter the circuit card number in the Card Number: field, or press F 2
(Choices) to select from a menu. Initially, all fields are populated with the
default values for the circuit card number entered.
3 Change any of the parameters as described in Assigning an ISDN-PRI
Layer 1 to Digital Circuit Cards on page 175 .
4 Press F 3 (Save).
The system changes the specified parameters for the selected circuit
card.
Displaying ISDN-
PRI Layer 1
Parameters The circuit card must first be assigned to the ISDN-PRI Layer 1 protocol to
use this procedure. See
Assigning an ISDN-PRI Layer 1 to Digital Circuit
Cards on page 175 for more information about making the initial assignment.
To display the ISDN-PRI Layer 1 parameters:
1 Start at the ISDN-PRI Layer 1 menu ( Figure 98 on page 175 ) and select:
> Display Parameters