HP R4.2 - Manual (Page 521)

A
Summary of Commands iCk, iCkAdmin
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 482
• {runlevels} — This is specification of the run levels at which to perform the
activity. The syntax is the same as used by init , that is, 4 = run level 4, 234
= run levels 2, 3, or 4.
• {checkPeriod/Time} — This indicates the activities performed repetitively
will have a specification of either how often to perform the activity or at
what times of the day or week to perform the activity. One of three forms
is used:
~ -
Perform the activity once when the rules are first read and then do not
perform it again.
~ checkPeriod
A period of time is specified as the sum of a number of different time
elements: [NNd] [NNh] [NNm] [NNs]. For example, 5m means “every 5
minutes,” and 5h 30m means “every five and a half hours.” Each
element is a number followed by the type of specifier, d, days, h, hours,
m, minutes, s, seconds. The order is irrelevant. 5h 30m is the same as
30m 5h.
~ Time
If it is more important that an activity be performed at a specific time of
day or week, then the “time” format should be used. It has the following
form: X {monthday} {weekday} {hour} {min} {s
ec}