HP R4.2 User Manual
Page 387
7
Common Administration
Reports Administration
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 348
Use the format of
MM/DD HH:MM
for month, day, hour, and minute. If the
Start Time:
field is left blank, the beginning of the administrative
command log is used.
8
Enter the stop time for the message search in the
Stop Time:
field, that
is, the time of the last message to be displayed.
Use the format of
MM/DD HH:MM
for month, day, hour, and minute. If the
Stop Time:
field is left blank, the end of the administrative command log
is used.
Note:
If nothing is entered in the
Start Time:
and
Stop Time:
fields,
the entire administrative command log is displayed.
9
Leave the
Message ID:
field blank.
10
Enter a single number from 1 to 999, or all in the
Number of Messages
to be Displayed:
field to specify the number of most recent entries to
be displayed. If you enter all, the report displays all entries maintained by
the log. If you enter a single number, the voice system searches all
records and displays only that number of the most recent entries that
match the specified start and stop time, and source. For example, if you
enter 5, the system displays only the 5 most recent matching records.